DSTIKE RESOURCE CENTER
Find the right files for your device.
Firmware downloads, source code, setup guides and hardware resources, organized by product family. Choose your model below to get started.
Match the full model name. A shared chip or a similar product name does not mean the firmware is interchangeable. Check the model, board revision and project instructions before updating.
Wi-Fi tools
Choose the firmware family first, then match the exact model and hardware revision.
ESP8266 Deauther
Watch X, X II, Y II and the Wi-Fi side of Z II · Deauther MINI V4 · OLED V8 · ESP8266 Power Bank · HACKHELD
Use the supported-device list and the build for your board. Watch Z II also has a separate USB automation function.
Deauther32
Watch SE, Watch MINI and Watch MAX · Deauther32 MINI, LCD Kit, Power Bank and Ultra · HackHeld32S3 / HackHeld32C5
Open the installer and check whether your exact device is listed. ESP32-S3 and ESP32-C5 firmware are not interchangeable. If your model is missing, ask DSTIKE for the correct files.
HackHeld32 & board resources
HackHeld32 development documentation · Deauther MINI V4 · Deauther32 MINI
Use these project pages for board details and development resources. Match the board revision before applying pinouts or example code.
USB automation
WiFi Duck, White Ducky II, S3 and Ultra use different hardware and firmware. Start with the name on your device.
WiFi Duck
DSTIKE WiFi Duck
The Wi-Fi controller and USB controller have separate installation steps. Follow the WiFi Duck documentation for both parts.
White Ducky II
White Ducky II · Check the standard / IR version
The WhiteDuckyII repository contains its sketch, SD card files and a schematic. Confirm your hardware revision, especially for an IR-equipped unit.
White Ducky S3
White Ducky S3
The S3 repository includes the Arduino sketch, partition file, sample script and setup notes. Use its README for the required build settings.
White Ducky Ultra
White Ducky Ultra with OLED, SD storage and onboard controls
Open the dedicated White Ducky Ultra repository for source code and project resources. Follow the repository instructions for your Ultra hardware revision.
Wi-Fi monitoring
Find the project documentation or request the files for your monitoring device.
Deauth Detector V3
DSTIKE Deauth Detector V3
Open the upstream project for source and installation notes. Check the LED, buzzer and board configuration against your device.
Wi-Fi Auditor
DSTIKE Wi-Fi Auditor
Read the device guide for its features and results. Contact DSTIKE for the firmware package or source resources matching your unit.
Sidekick & Sidekick Lite
DSTIKE Sidekick / Eve · Sidekick Lite
These are separate hardware models. Include the full model name when asking for update or recovery files.
Audio & maker projects
Open the matching project for source and hardware files. A source repository may require a build rather than provide a ready-to-flash binary.
ESP32 Walkie-Talkie
DSTIKE ESP32 Walkie-Talkie
Project files include an Arduino sketch, schematic and enclosure files.
Receive-Only Speaker
DSTIKE ESP-NOW Receive-Only Speaker
Use the dedicated receiver project, which is separate from the handheld Walkie-Talkie.
ESP32-DA Bluetooth Speaker
DSTIKE ESP32-DA USB Bluetooth Speaker
Open the ESP32-DA project for the resources associated with this speaker.
Christmas Tree MP3
DSTIKE Christmas Tree MP3 Player & Bluetooth Speaker
Use the dedicated Christmas Tree MP3 project when looking for its code and project files.
ESP32-S3 Game Console
DSTIKE ESP32-S3 Programmable Handheld Game Console
The game-console repository includes example sketches and game files. This is separate from the HackHeld32S3 Wi-Fi testing model.
Wi-Fi Internet Radio
DSTIKE USB Wi-Fi Internet Radio
Use the product page to identify your radio, then ask DSTIKE for its current project or recovery files.
Before you flash
Choose the correct file and installation method
- Identify your device. Match the full product name and hardware revision, including suffixes such as II, S3, C5, MINI, MAX or Ultra.
- Read the project instructions. A source repository, a firmware binary and a hardware schematic are different resources. Follow the README or installer for your exact model.
- Prepare for the update. Save scripts and settings you want to keep. Use a USB data cable and follow the project's connection and flashing instructions.
If the installer does not list your model, contact DSTIKE before choosing a similar-looking device.
Downloads, source code and hardware files: what is the difference?
Firmware downloads / installers provide an installation route described by the project. Source code may need to be compiled with the specified tools and settings. Hardware files can include schematics or enclosure designs; they are not firmware.
For projects without a clearly identified download for your revision, use the support link below.
Older White Ducky and Watch Z resources
These are legacy project links. Match the original model and revision before using them; they are not replacements for White Ducky S3 or Ultra firmware.
Need files for your exact model?
Send us the full product name, order number, a photo of the board or model label, and the firmware version if it is available. Tell us whether you need an update, recovery firmware, source code or hardware documentation.
External links open the original project documentation or repository. Availability and installation instructions are maintained by each project.