DSTIKE Deauther Watch Comparison: Which Model Should You Choose?

Which DSTIKE Deauther Watch fits your project? Start with the Wi-Fi bands you need, then compare how you want to operate, carry, and expand the device.

This guide compares Watch X, X II, Y II, Z II, and Deauther32 Watch SE, MINI, and MAX. They are not simply seven steps from basic to advanced: different models prioritize portability, hardware development, or USB automation.

Specifications reviewed: September 24, 2026. This comparison covers the listed hardware and documented product workflows, not a hands-on firmware or battery benchmark. Check the selected product version for current specifications, included accessories, pricing, and availability.

1. Find your starting point

2. The comparisons that matter most

Watch MINI vs. Watch MAX: portability or expansion?

Both use ESP32-C5 and cover 2.4 GHz and 5 GHz. Moving to MAX does not add another Wi-Fi band; it changes the physical setup and development connections.

Choose MINI when a compact, self-contained watch is your priority. Choose MAX when you will use its larger screen, external antenna connection, extra GPIOs, or separate USB interfaces. A bigger enclosure is not, by itself, a guarantee of better results on every network.

Watch SE vs. Watch MINI: development peripherals or 5 GHz?

SE offers microSD, a DS3231 real-time clock, AXP2101 power management, and 13 breakout GPIOs. MINI takes a different direction: compact dual-band wireless use.

Choose SE for an ESP32-S3 project that needs those peripherals. Choose MINI when 5 GHz is essential. Do not assume that changing from S3 to C5 preserves every storage, USB, or peripheral feature.

Watch X II vs. Watch Y II: which classic configuration?

Both use ESP8266 and a monochrome OLED for 2.4 GHz work. X II emphasizes a compact internal-antenna setup. Y II adds a standard external antenna and a 1000mAh battery, compared with X II’s 700mAh.

Choose between their physical configurations, not an assumed difference in supported bands. X II also has an optional antenna expansion-board package; that accessory route is different from Y II’s standard configuration.

3. Hardware specifications at a glance

These tables separate standard hardware from optional accessories. GPIO access means a connection is available for development—not that every attached module will work without suitable wiring and software.

On smaller screens, swipe horizontally inside each table.

Product details: Watch X · Watch X II · Watch Y II · Watch Z II.

X / X II accessory note: an antenna expansion board is included only with the matching option. Do not assume that the external antenna itself is included. Expansion pads can require soldering; they are not equivalent to a ready-to-connect header.

Product details: Watch SE · Watch MINI · Watch MAX . A chip capability is not a promise that every related feature is exposed in the supplied firmware.

4. Firmware and controls: what will you actually use?

On-watch operation versus browser control

Local controls let you operate the watch without making a phone the main interface. For browser use, supported ESP8266 Watch X / Y / Z firmware offers a local Wi-Fi web interface. The current DSTIKE FAQ describes Deauther32 watches as on-device products without that same classic mobile interface.

A firmware-specific settings page is not necessarily a full browser control panel. When phone operation is essential, confirm the exact model and installed build before ordering—particularly for SE, whose product description lists possible web configuration depending on firmware.

Listed features are not identical across firmware families

Classic ESP8266 product descriptions cover network discovery, signal observation, packet activity, and clock functions. MINI’s documented workflow includes dual-band scanning and an RSSI signal display. Do not assume the same menu, controls, or features carry over between ESP8266, S3, and C5.

For SE, microSD and RTC are installed hardware. Automatic wireless logging is not guaranteed, and some supplied-firmware RTC functions are described as still under development. Custom peripheral projects can require replacement firmware.

Updating or restoring firmware

Start with the Firmware & Source Code page and your model’s instructions. Check the exact board revision, processor, display, and pin configuration before flashing. Sharing a processor does not make firmware binaries interchangeable.

Record the current version and save settings or scripts before making changes. Use the documented recovery method for your board rather than guessing which USB port, button sequence, or firmware image applies.

5. Watch Z II and USB keyboard automation

Watch Z II adds a separate USB automation workflow to its wireless functions. Its DIP switch selects up to 64 profiles that the user prepares; that is a selection capacity, not a promise of 64 ready-made scripts.

USB keyboard input requires a physical USB data connection to an authorized computer. Confirm the supported script syntax, file preparation, keyboard layout, and operating-system shortcuts for the installed firmware. USB HID support alone does not establish DuckyScript 3.0 compatibility.

The expansion header also exposes SDA, SCL, IO4, IO12, GND, and 3V3 for suitable modules. An expansion connection does not mean an infrared module or its firmware is supplied.

Two USB ports do not automatically mean USB HID

SE’s native USB is a development interface, not evidence of a supplied Z II-style script runner. On ESP32-C5, the built-in USB Serial/JTAG controller is fixed-function: it cannot be turned into a general USB keyboard by selecting a different USB mode.

Compare USB automation separately from connector count. See Espressif’s ESP32-C5 USB Serial/JTAG documentation for the controller’s limits.

6. Everyday use: screen, size, battery, and antenna

Compare the whole device—not just the display diagonal

Published dimensions put MINI at approximately 60 × 46 × 23 mm and 63 g, versus MAX at approximately 70 × 60 × 25 mm and 100 g. These are listing figures, not measurements taken under a shared test protocol.

Review side views, connector positions, and the antenna arrangement as well as front-facing photos. Separately framed product images are not a reliable same-scale size comparison. Consider whether you will mostly wear the device, hold it, or use it on a desk.

Battery capacity is not a standardized runtime result

A larger mAh rating does not establish how many hours you will get across different processors, screens, and workloads. Display brightness, radio use, LEDs, attached peripherals, and battery condition all affect consumption.

This guide does not rank runtime without comparable testing. When planning a session, use a runtime figure only with its firmware, operating mode, brightness, and test conditions—not as an unconditional guarantee.

External antennas add configuration flexibility

An external connection lets you select and position a compatible antenna, but does not guarantee a particular distance or test result. Band compatibility, connector type, obstacles, interference, and orientation still matter.

For a dual-band setup, check that any replacement antenna covers both required bands. Confirm the antenna and expansion board separately in the selected package.

7. Already own a DSTIKE watch?

Upgrade to solve a specific limitation—not just to move to a newer name.

Watch X to X II: the practical changes include Micro USB to USB-C, 500mAh to 700mAh, and revised enclosure and power-control details. The wireless band remains 2.4 GHz.

Watch Y to Y II: the revision improves front-facing RGB visibility, charging-circuit design, and enclosure fasteners. It retains the original platform and core wireless specifications.

A classic watch or SE to MINI / MAX: consider the change when 5 GHz is a real requirement. Recheck software and USB needs rather than assuming every existing workflow will transfer.

MINI to MAX: use the screen, antenna, connections, and physical size as your decision criteria. Both remain on the same dual-band processor platform.

When your current device already does the job, keeping it can be the right choice.

8. Questions to answer before ordering

Do I need programming experience?

Pre-flashed, ready-to-use versions can generally be operated without writing code. Adding peripherals, changing firmware, or creating a custom application requires additional setup and technical knowledge. Check the selected version rather than assuming every kit is ready to use.

Does Wi-Fi 6 mean 6 GHz? Does 5 GHz mean 5G cellular?

No. MINI and MAX use the ESP32-C5’s 2.4 / 5 GHz Wi-Fi 6 radio . These watches do not add 6 GHz Wi-Fi or 5G cellular connectivity. A Wi-Fi generation name and a frequency band are different specifications.

Will every function work on WPA2 or WPA3 networks?

No. Discovering an access point, monitoring observable information, and carrying out an active test are different operations. Protected Management Frames and network settings can limit relevant tests. These devices do not crack WPA2 / WPA3 passwords or guarantee a PMF bypass. See the compatibility FAQ.

Does dual-band support guarantee every 5 GHz channel or simultaneous monitoring?

No. The available channels and operating modes depend on firmware, hardware support, and regional configuration. The dual-band label alone does not promise concurrent monitoring of both bands. Confirm the specific operation you need.

Is a Deauther Watch a replacement for a consumer smartwatch?

Choose it as a wearable development and wireless-learning tool. A clock display should not be taken as a promise of phone notifications, health tracking, contactless payments, or a consumer smartwatch app ecosystem.

Can I use it in rain or while swimming?

Do not assume water resistance from the watch shape or protective enclosure. Unless your exact product version specifies a suitable water-resistance rating, keep it dry and do not use it for swimming or showering.

Are the battery, antenna, storage card, and cable included?

Check the selected variant and its package list. An optional expansion board, external antenna, or development module is not automatically included because the device supports it. Keep the exact model name and hardware revision in mind when ordering accessories.

Choose the watch that matches your actual project

Start with the required band, confirm the software workflow, then decide which screen, controls, and connections you will use. Compare current prices only after those requirements are clear.

Still deciding? Contact DSTIKE with your intended use, required Wi-Fi band, budget, and any USB or peripheral requirements. For an existing device, include its model, hardware revision, and firmware version.

Use wireless testing and USB automation only on networks and computers you own or have explicit permission to assess. Follow applicable radio, privacy, and telecommunications requirements.