DSTIKE Deauther32 Watch Mega– Aluminum Alloy Wi-Fi Testing Watch
DSTIKE Deauther32 Watch Mega
Pickup currently not available
Translation missing: en.dstike.delivery.import_charges
An aluminum alloy redesign of Watch MAX, with a 1800 mAh battery and upgraded power management.
The DSTIKE Deauther32 Watch Mega is a wearable wireless assessment device for makers, developers, and authorized network testing. It retains the same preinstalled software as the Deauther32 Watch MAX while introducing a redesigned enclosure, a larger battery, and an updated power system.
Scan networks, review results, monitor RSSI signal strength, and run supported assessments on compatible networks you own or have permission to test. Navigate the on-device menu with dedicated DOWN, CONFIRM, and UP buttons.
Hardware upgrades that define the Mega
-
Aluminum alloy case: A metal enclosure secured with stainless steel screws, paired with a 22 mm silicone strap.
-
1800 mAh battery: Increased battery capacity for this redesigned Watch MAX model.
-
BQ24074 + TPS63802 power system: Replaces the previous TP4056-based design with battery charging, power-path management, and buck-boost voltage regulation.
-
Additional protection features: Overvoltage protection, electrostatic discharge (ESD) protection, and temperature protection.
-
Familiar software: The same preinstalled software and operating functions as Watch MAX.
Charging and power control
The watch can charge while switched on or off, and you can turn it on or off during charging. Charging time is approximately 4–5 hours.
The charging indicator is visible through the gap at the antenna base. While connected to charging power:
-
Red: Charging.
-
Off: Fully charged.
This charging light is separate from the front RGB operating-status indicator.
Controls and USB connections
Dedicated POWER and RESET buttons handle power control and restarting. Three navigation buttons provide DOWN, CONFIRM, and UP control.
The watch has two USB-C interfaces, UART and USB. Both support firmware uploads. Please read the firmware notice below before flashing another program.
Technical specifications
| Specification | Details |
|---|---|
| Model | DSTIKE Deauther32 Watch Mega |
| Design basis | Redesigned Watch MAX hardware with the same preinstalled software |
| Case material | Aluminum alloy |
| Screws | Stainless steel |
| Battery capacity | 1800 mAh |
| Charging time | Approximately 4–5 hours |
| Power management | BQ24074 charger with power-path management + TPS63802 buck-boost regulator |
| Protection features | Overvoltage, ESD, and temperature protection |
| Body dimensions | 80 × 53 × 23 mm (L × W × T; length includes the antenna; straps excluded) |
| Weight | 134 g |
| Strap | Silicone, 22 mm wide |
| USB interfaces | Two USB-C ports: UART and USB; both support firmware uploads |
| Buttons | POWER, RESET, DOWN, CONFIRM, UP |
| Water resistance | Not waterproof |
Firmware notice — please read before flashing
The original factory firmware has not yet been officially released. If you overwrite it with different firmware, you will not be able to restore the original factory firmware.
Keep the preinstalled firmware if you want to retain the supplied Watch MAX functions. The ability to upload custom firmware does not mean a factory recovery image is available.
Intended use and care
Use only on networks you own or have explicit permission to test. The watch is not waterproof. Keep it dry.