Deauther Watch X II - ESP8266 Development Watch
Reliable shipping
Flexible returns
| Difference | Deauther Watch X | Deauther Watch X II |
|---|---|---|
| USB | Micro USB | USB-C |
| Battery | 500mAh | 700mAh |
| Screw | Cross-head | Hexagonal |
| RGB | ws2812b | ws2812b-2 |
| Power Switch | Onboard | 3D-print |
Take Control of Your Network Experiments
The Deauther Watch is not just a timepiece; it's a powerful ESP8266 development board integrated into a wearable form factor. Designed for security enthusiasts, developers, and white-hat hackers, this tool allows you to perform WiFi authentication tests, explore wireless protocols, and develop your own ESP8266 software.
Key Features
-
WiFi Security Testing: Pre-installed with the latest Deauther software. Perform deauth attacks, beacons, and probes to test your network's vulnerability.
-
Highly Extensible: It’s an open-source ESP8266 development platform. Use the Arduino IDE to flash your own scripts and turn it into any smart device you imagine.
-
Long-lasting Power: Equipped with an 700mAh lithium battery and a built-in charging circuit, providing up to 7-8 hours of active use.
-
Intuitive Interface: Features a 1.3-inch OLED display and a 3-way momentary slide switch for seamless navigation through menus.
-
Full Protection: Comes with a 3D-printed case and a transparent acrylic cover to protect the delicate PCB while showing off its "cyberpunk" internal structure.
Technical Specifications
| Feature | Details |
|---|---|
| Microcontroller | ESP8266(Custom 4MB ESP-07) |
| Battery | 700mAh Lithium Ion |
| Antenna | Built-in Ceramic Antenna |
| Connectivity | USB-C (for charging and flashing) |
| Display | SH1106 1.3" OLED |
| Display SDA | GPIO 5 |
| Display SCL/SCK | GPIO 4 |
| WS2812b RGB LED | GPIO 15 |
| Button Up | GPIO 12 |
| Button Down | GPIO 13 |
| Button Select | GPIO 14 |
| LED | GPIO 16 |
Function
- Deauther Attack: Disconnect 2.4G WiFi
- Deauther Beacon: Create fake networks
- Deauther Probe：Confuse wifi trackers
- Packet Monitor：Display wifi traffic
- Clock：Display Real Time Clock
- LED：Flashlight
Deauth
Closes the connection of WiFi devices by sending deauthentication frames to access points and client devices you selected. This is only possible because a lot of devices don't use the 802.11w-2009 standard that offers a protection against this attack. Please only select one target! When you select multiple targets that run on different channels and start the attack, it will quickly switch between those channels and you have no chance to reconnect to the access point that hosts this web interface.
Beacon
Beacon packets are used to advertise access points. By continuously sending beacon packets out, it will look like you created new WiFi networks. You can specify the network names under SSIDs.
Probe
Probe requests are sent by client devices to ask if a known network is nearby. Use this attack to confuse WiFi trackers by asking for networks that you specified in the SSID list. It's unlikely you will see any impact by this attack with your home network.
What's in the Box?
- 1 x Deauther Watch (Assembled)
- 1 x USB Data Cable
- 1 x Quick Start Guide
Disclaimer
I designed this development board especially for Spacehuhn's great project: ESP8266 Deauther. It has been authorized by him and is officially supported. This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur!
This device is intended for educational and testing purposes only. Please use it responsibly and in accordance with local laws and regulations regarding network security and privacy.
Attention
Please note that the ESP8266 does only support 2.4GHz. When the RGB indicator light is off, please charge it promptly. The charging time is 4 to 5 hours. When fully charged, the indicator light changes from red to green.