{"product_id":"dstike-wi-fi-auditor-esp32-dual-oled-monitor-with-800mah-battery-3d-printed-case","title":"DSTIKE Wi-Fi Auditor – ESP32 Dual OLED Monitor with 800mAh Battery \u0026 3D-Printed Case","description":"\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/q8FDteEwWQI?si=N4kGoLb3qTf3miwt\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eUnderstand the Wi-Fi Around You\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DSTIKE Wi-Fi Auditor is a portable 2.4 GHz Wi-Fi configuration inspection tool built around the ESP32-WROOM-DA. It combines two 1.3-inch OLED displays, physical navigation controls, an 800mAh rechargeable battery, and a 3D-printed enclosure in one compact device.\u003c\/p\u003e\n\u003cp\u003eBrowse nearby access points on one screen while viewing the selected network’s security configuration on the other. Check advertised authentication methods, encryption settings, and management frame protection information without connecting to the network or entering its password.\u003c\/p\u003e\n\u003cp\u003eDesigned for makers, networking enthusiasts, wireless education, and checking your own router settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Displays, More Useful Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two OLED screens show complementary information:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLeft display:\u003c\/strong\u003e Nearby access points, signal strength, selection indicator, and configuration rating.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRight display:\u003c\/strong\u003e Detailed information about the selected access point across four pages.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe four detail pages include:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAssessment:\u003c\/strong\u003e Configuration rating, reasons, and suggested improvements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSecurity:\u003c\/strong\u003e Authentication method, unicast and group encryption, Protected Management Frames (PMF), and observed WPS information.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRadio:\u003c\/strong\u003e Access point MAC address (BSSID), channel, signal strength, and recent reception information.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Access point count, listening status, and device diagnostics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWi-Fi Configuration Assessment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe firmware examines available broadcast information and presents a configuration rating with an explanation.\u003c\/p\u003e\n\u003cp\u003eDepending on the information received, results may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RISK:\u003c\/strong\u003e Open wireless links, WEP, or other weak or missing encryption.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWEAK CONFIG:\u003c\/strong\u003e Legacy WPA or TKIP is allowed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBASIC:\u003c\/strong\u003e WPA2-Personal with recognized AES-based encryption.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMIXED MODE:\u003c\/strong\u003e WPA2\/WPA3 transition configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSTRONG CONFIG:\u003c\/strong\u003e Observed settings meet the firmware’s WPA3, encryption, and required-PMF criteria.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eREVIEW:\u003c\/strong\u003e Settings such as enterprise authentication require further evaluation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eENCRYPTED:\u003c\/strong\u003e OWE encryption is observed, but the access point’s identity is not verified.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUNKNOWN:\u003c\/strong\u003e Information is incomplete, unsupported, inconsistent, or no longer current.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePMF information distinguishes between optional and required protection when available. WPS information indicates whether a WPS advertisement was observed; it does not confirm an exploitable vulnerability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Physical Controls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrowse networks and switch between detail pages directly on the device.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRocker left \/ right\u003c\/td\u003e\n\u003ctd\u003eSelect the previous or next access point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePress the rocker\u003c\/td\u003e\n\u003ctd\u003eCycle through the four detail pages\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDedicated scan button\u003c\/td\u003e\n\u003ctd\u003eStart a new scan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery-power switch\u003c\/td\u003e\n\u003ctd\u003eEnable or disable battery power to the device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe firmware scans on startup, then listens for broadcasts to update information for access points already in the list. Press the scan button after moving to another location or when you want to discover new access points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e800mAh Rechargeable Battery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included 800mAh battery allows portable use without a continuous USB connection. A physical switch controls whether the battery supplies power to the device.\u003c\/p\u003e\n\u003cp\u003eThe board integrates a TP4056 charging circuit. Connect a suitable 5V USB power source through the USB-C port to recharge the battery.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRed charging indicator:\u003c\/strong\u003e Charging in progress.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGreen charging indicator:\u003c\/strong\u003e Charging complete.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBattery runtime depends on firmware activity, wireless use, and display settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3D-Printed Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included 3D-printed case houses the board and battery while providing access to the displays, controls, and USB-C port.\u003c\/p\u003e\n\u003cp\u003eIts enclosure makes the device easier to handle and use as a portable tool. Visible print layers and minor surface variations are normal characteristics of the 3D-printing process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eESP32 Development Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePowered by an ESP32-WROOM-DA module with 16MB flash memory, the device also provides a platform for custom Arduino projects involving wireless scanning, OLED interfaces, and physical controls.\u003c\/p\u003e\n\u003cp\u003eThe module includes two PCB antennas for antenna diversity. Both serve the 2.4 GHz radio; dual antennas do not mean dual-band Wi-Fi.\u003c\/p\u003e\n\u003cp\u003eCustom functionality depends on the firmware installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain module\u003c\/td\u003e\n\u003ctd\u003eESP32-WROOM-DA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash memory\u003c\/td\u003e\n\u003ctd\u003e16MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWi-Fi inspection band\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntennas\u003c\/td\u003e\n\u003ctd\u003eTwo PCB antennas integrated into the module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplays\u003c\/td\u003e\n\u003ctd\u003e2 × 1.3-inch SH1106 OLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay interface\u003c\/td\u003e\n\u003ctd\u003eI²C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay addresses\u003c\/td\u003e\n\u003ctd\u003eLeft: 0x3D \/ Right: 0x3C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNavigation\u003c\/td\u003e\n\u003ctd\u003eLeft \/ press \/ right rocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional control\u003c\/td\u003e\n\u003ctd\u003eDedicated scan button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003eIncluded 800mAh rechargeable battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery control\u003c\/td\u003e\n\u003ctd\u003ePhysical battery-power switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging circuit\u003c\/td\u003e\n\u003ctd\u003eOnboard TP4056\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging connection\u003c\/td\u003e\n\u003ctd\u003eUSB-C, 5V input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging indicators\u003c\/td\u003e\n\u003ctd\u003eRed: charging \/ Green: fully charged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003e3D-printed case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevelopment environment\u003c\/td\u003e\n\u003ctd\u003eArduino IDE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in the Package\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1 × DSTIKE Wi-Fi Auditor device with dual OLED displays\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 × 3D-printed enclosure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 × 800mAh rechargeable battery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBefore You Buy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis device inspects \u003cstrong\u003e2.4 GHz Wi-Fi only\u003c\/strong\u003e. It cannot scan 5 GHz or 6 GHz networks. The current firmware defaults to channels 1–11.\u003c\/p\u003e\n\u003cp\u003eThe current Wi-Fi assessment firmware does not use RTC or microSD recording functions. Scan results are not saved when the device is switched off or a new scan begins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration ratings describe the wireless settings observed by the device, not a guarantee that a network is safe.\u003c\/strong\u003e Scanning cannot establish password strength, verify an access point’s identity, detect every router vulnerability, or determine whether its internet connection is trustworthy.\u003c\/p\u003e","brand":"DSTIKE","offers":[{"title":"Default Title","offer_id":49148200911031,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0136\/5245\/9584\/files\/ChatGPT_Image_2026_9_11_11_32_06.png?v=1789097672","url":"https:\/\/dstike.com\/products\/dstike-wi-fi-auditor-esp32-dual-oled-monitor-with-800mah-battery-3d-printed-case","provider":"DSTIKE","version":"1.0","type":"link"}